Of everything on a terrace, the dining table is used most and covers the most ground. Meroni & Colzani makes two for outside, and both come from the Cabiate workshops that have joined and finished tables for three generations: Trastevere, on an iroko base, and Bolgheri, on painted metal.
trastevere, the crossed legs
Trastevere began as an indoor table in canaletto walnut or open pore ash. Its legs cross and form a double Y that runs along the length of the top, parallel to it. The outdoor version cuts the base in solid iroko and sets a glass top on it, and you can choose the color of the glass.
The glass matters to the look. You see through it to the crossing legs, so the base stays the feature from wherever you stand. On a small terrace a glass top also keeps the table from looking heavy. See the Trastevere family.

bolgheri, curves under stone
Bolgheri comes from Bonura Design. The workshop paints the metal base frame, and a curve in each leg lightens it. The outdoor version carries a stone top. The factory's own words describe the pairing as elegance that does not fight the stone: the curves soften the base, and the stone gives weight above it.
Stone suits a table that stays out all year. It shrugs off rain, it holds its place in wind, and it ages at its own pace. Bolgheri also has a side table, with two painted metal wings under a top in marble or lacquer, if you want a second surface in the same language. See the Bolgheri family.
sizing the table to the guests
Count the people you seat on an ordinary weekend, then add the extra two you host once a month. Every diner wants a stretch of 24 to 30 inches along the top. Behind every chair keep a yard of clear floor, enough to stand up without knocking a wall or a planter. A path of about 3 feet should run past the table to the house.
Those numbers eat space fast. A table for six on a terrace that fits it with no room to walk will feel cramped by the second course. If in doubt, choose the smaller table and add a side table for serving.
Shape follows the terrace. A long, narrow terrace takes a long table and leaves the path free along one side. A square courtyard suits a squarer table with people on all four sides, which also makes conversation easier, since no guest ends up at the far end of a line. Mark the table on the floor with tape for a weekend before you order; you learn more from that than from any plan.
glass or stone
Glass on iroko gives you lightness and a view of the base. It shows fingerprints and water marks, so a cloth and a spray bottle join the kit. Stone on painted metal gives you weight and calm. It hides marks better, and it asks you to wipe spills of wine or oil before they sit.
Think about the light too. A glass top reflects the sky at noon; a stone top stays matte. On a terrace where you eat at lunch in bright sun, a matte top is easier on the eyes.
seats and space
-
01 / 04
Guests 4
- Table edge you need
- About 24 inches each on two long sides
- Floor you need
- Table plus about 3 feet on each side
- Note
- A square or short table works
-
02 / 04
Guests 6
- Table edge you need
- About 24 to 30 inches each
- Floor you need
- Table plus about 3 feet all round
- Note
- A long table suits a narrow terrace
-
03 / 04
Guests 8
- Table edge you need
- About 24 to 30 inches each, one at each end
- Floor you need
- Table plus about 3 feet all round and a path
- Note
- Check the path to the kitchen door
-
04 / 04
10 and up
- Table edge you need
- Two tables end to end, or one long top
- Floor you need
- Plan the room first
- Note
- Ask us about lengths
who sits at Trastevere and Bolgheri
Both tables pair with the outdoor chairs in the catalog. Giudecca, drawn by Maurizio Di Mauro, has an outdoor chair with legs that run into the backrest in a stylized S. Lungotevere has an outdoor chair on solid iroko legs, which picks up the wood of a Trastevere base.
Tell us the number of guests, the size of the terrace and the top you lean toward, in the request at the foot of the page. The answer lists the Meroni & Colzani table and chairs that fit, the finishes open on them, the lead time, and what each piece costs.




